Heavy oil burners are now more environmentally friendly, but also a wide range of applications, here is a small series and everyone analyzes the general requirements of heavy oil burners.
The heavy oil burner uses a metal material having a melting point of more than 700 °C.
2. Thickness and surface treatment should meet the following requirements:
a. The wall thickness of the cast product shall not be less than 3 mm, and there shall be no obvious defects such as casting porosity.
b. The wall thickness of the die-casting product shall not be less than 1.5mm, and shall not have any defects affecting the use.
c. The wall thickness of stainless steel products shall not be less than 0.3mm.
d. The wall thickness of hot dip aluminized steel products shall not be less than 0.3mm.
e. Ordinary steel products, the wall thickness of the steel shall not be less than 0.5mm, and the surface shall be treated with anti-corrosion treatment. When using enamel for surface treatment, a steel ball impact test shall be performed, and the enamel shall not fall off.
f. The wall thickness of copper and copper alloy products shall not be less than lmm.
