High-energy igniters are currently widely used in coal-fired (oil, gas) boilers, petrochemicals, metallurgy, aerospace and other industries. The ignited mediums: gas, light oil, heavy oil, etc., although only a small part of the entire operating system, but In the production process, it plays a very important role, so the high-quality high-energy igniter products will be selected and recognized by customers.
High-energy ignition device (including high-energy igniter, ignition gun, ignition cable)
First, the high-energy igniter must be mounted horizontally or vertically with bolt fasteners and should be protected against grounding or protective zeroing. Secondly, the nut at both ends of the shielded cable is screwed to the output end of the igniter and the input end of the igniter, and both ends must be tightened to closely fit the center electrode; if there is a gap between the electrodes, the discharge of the center electrode will be caused. . Again, the tip end of the igniter should extend into the densest part of the fuel zone. It is determined according to the recirculation of the stabilizer and the specific angle of the angle of the gun. Generally, the tip end of the igniter protrudes into the fuel zone by 100 to 200 mm. Finally, after the high-energy ignition device is properly installed and commissioned, the power supply should be able to ignite reliably. If the power supply voltage is too low, the ignition frequency will be too slow; if the power supply voltage is too high, the ignition frequency will be too fast; at this time, the secondary output welding line of the transformer should be adjusted to make the secondary voltage reach the normal level, so that the ignition frequency can be used. standard.
The high-energy igniter produced by electric power adapts to the ignition energy requirements of many different fuels (including light oil and heavy oil), and has low discharge voltage, large spark energy, small size, convenient operation, safety and reliability, corrosion resistance, long service life, etc. Features, and not only high-energy igniters, products used with them, such as igniters, ignition cables, oil guns, propellers, etc., can also be directly purchased at Jeneng Power, a true one-stop purchase of all products, manufacturers Production direct delivery, the best price.
