Coal tar separator used in ceramic roller kiln and water gas burner belongs to metal processing and gas filtration technology field. In heat source fuel ceramic industry production, a large number of coal gas also known as water gas is used. The production of this gas is a self-built gas station, converted from coal gasifier to gas. Hydrogen sulfide, coal tar and phenolic water produced in the process of coal conversion to natural gas are very serious environmental pollution. But because the cost is much lower than that of natural gas pipelines, it is now widely used in the ceramic industry. Due to the high content of coal tar and water, it will affect the nozzle hole of burner and easily cause the blockage of carbon nozzle. The cleaning is carried out at the edge of high temperature kiln, and the working environment is hard to imagine. Therefore, the gas burner is majorly used.
In order to solve the blockage problem, we provide a coal tar separator burner, gas into the burner, again for oil and gas separation, so as to solve the problem of coal tar blockage caused by the nozzle hole of the burner. The technical scheme is: coal tar separator is composed of separation tank, pipeline, input and output pipeline, sewage valve; The separation tank is composed of tank body, tank cover, tank barrel, input pipe connection hole, sewage valve connection pipe and the tank at the bottom of the tank; The utility model is simple in structure, quick in maintenance, easy to carry and easy to disassemble. Due to the rich oxygen in the flue gas, the flue gas takes away less heat, the fuel can be fully burned, the flame control range is wide, energy saving and environmental protection advantages are wide. In the field of metallurgy, especially in the process of nonferrous metal smelting, the scale of production is gradually expanded, and the design of metallurgical furnace equipped with automatic burner is relatively advanced
