China 40W Lithium Power Retrofit Famous Brand LED Solar Street Light

We ensure the high quality and excellent performance of the Industrial Fuel Gas Burner, Hot-blast Stove BURNER, Coal Tar Hot-blast Stove Burner, and resolutely prevent unqualified products from leaving the factory. We always put corporate integrity and social benefits in an important position. After years of unremitting efforts and pioneering, we have established a complete set of production and sales system to provide customers with perfect and efficient services. We adhere to the product design principle of 'professionalization and practicality', wholeheartedly provide domestic and foreign enterprises with a complete set of application solutions and perfect services.

Brief introduction of the burner fuel delivery system-gas and oil valve train and pumping station

There are several different ways for fuel delivery systems, including valve train for fuel gas/oil/liquid and pumping stations for fuel oil/liquid. The liquid/oil valve train or pump station produced by us mainly includes: oil pump, return valve, oil filter, oil pressure gauge, oil pipe and joint, fuel oil solenoid valve, nozzle, safety valve, back-pressure valve flow control system, monitoring system, heavy oil preheater etc. The gas valve train usually includes: gas solenoid valve, gas filter, leak detector, pressure switch, gas regulator valve, gas pressure gauge, gas reducing valve, etc. Customers can appoint us to select these important parts, and can also appoint some international brands components like SUNTEC, DANFOSS, RIELLO, NOP etc.

The layout condition of the oil pump pipeline refers to the height, distance and trend of liquid delivery, as to calculate the system pressure and check the power. If necessary by pipe system data, should also draw device characteristics curve. When design and arrange pipelines, pay attention to the following matters:

1. Large pipe diameter: low liquid flow speed and low resistance loss, but cost is high; small pipe diameter: resistance loss and pump pressure will be greatly increased, which will increase the equipped power, cost and operating fee. Therefore, it should be considered comprehensively for both technology and economy.

2. The discharge side of the pump must be equipped with valves and non-return valves. The valve is used to adjust the working conditions, and the non-return valve can prevent the oil pump from reversing when the liquid flows back.

3. Try to use straight pipe, reduce accessories and shorten pipe length. When elbow is necessary, the bending radius of the elbow should be 3-5 times the diameter of the pipe, the angle is better to greater than 90 ℃.

4. The discharge pipe and its joints shall consider the maximum pressure they can withstand.

Our company has a senior technical team with rich experience in the industry for many years. We have been committed to the field of China 40W Lithium Power Retrofit Famous Brand LED Solar Street Light for a long time. Please feel free to contact us! Comprehensive Info and parameters from the merchandise will probably be sent to you for any comprehensive acknowledge. We always think about the question on the side of the customers, because you win, we win!